Our unit's are providing 240LFPM of airflow on low-fan speed setting, ambients are 18*C and chassis temp is much the same - appears they aren't going to admit this is a manufacturing fault - no silicon should ever run at this temperature at idle. Temperature range: – 40 ☌ to +70 ☌ (without BBU) - 0 ☌ to +45 ☌ Relative humidity range is 5 percent to 90 percent noncondensing. ![]() The parameters for the nonoperating (such as storage and transit)Įnvironment for these controllers are as follows: ![]() Operating the LSISAS2208 processor above the maximum ambient Relative humidity range is 20 percent to 80 percent noncondensing.Īirflow must be at least 200 linear feet per minute (LFPM) to avoid Please find these requiredįor the MegaRAID SAS 9270-8i RAID controller, the operating (thermalĪnd atmospheric) conditions are as follows: Any software or support resources provided by Lenovo are made available AS IS and. This product is no longer being actively supported by development (End of Development Support) and no further software updates will be provided. Inside the server which requires at least 200 LFPM of airflow from theįans to stay at the required threshold. MegaRAID Storage Manager Application v17.05.01.03 for Windows - Lenovo Support US. The main temperature to watch will be the ambient temperature Withing the range of the temperature threshold of the ROC which willīe 115. I do not see anything in the logs that might indicates an overheating of the controller card. ![]() Well, LSI's response was hardly a solution or even useful:
0 Comments
Leave a Reply. |